Heat Sink for Steam Deck M.2 2230 SSD SSD Heatsink with Thermal Silicone Pad Solid State Hard Disk Cooler Game Console Accessory

Heat Sink Copper with Thermal Silicone Pad Heat Cooler Radiator Antioxidant Game Console Accessories for Steam Deck M.2 2230 SSD
Feature:
1. Special Design: Precise size calculation to prevent installation deviation and short circuit, suitable for smaller installation space, such as Steam Deck M.2 2230 SSD.
2. High Quality Material: Made of red copper with a high thermal conductivity of 401W/(m.k), chemically polished to prevent burrs and short circuits; After multiple grinding and milling processes, the surface has undergone oxidation resistance treatment, which does not rust or oxidize. It is more durable than ordinary copper sheets, combined with high-performance thermal conductive silicon sheets for better heat dissipation, and is not easy to leave fingerprints. The surface will not oxidize or darken after long-term use.
3. Comes with Thermal Conductive Silicon Wafers: Thermal conductive silicone grease is soft and resilient, paired with high-performance 5W/m.K thermal conductive silicon wafers, which can tightly fit the surface of electronic devices and fill in gaps in hard disk particles, keeping the heat dissipation fins at the same height, achieving rapid heat dissipation and extending the lifespan of the hard disk.
4. Packaging List: Equipped with 0.5mm red copper heat sink * 1 thermal conductive silicon chip * 3 phase change heat sink * 2 M2 screw * 2 warping blade * 1 pry bar * 1 screwdriver * 1 Steam Deck shell backup screw * 2 sets (16 pieces)
5. Satisfaction Guarantee: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly.

Specification:
Origin: Mainland China
Material: Silicon, copper, metal, etc
Size: About 26x23mm/1.02x0.90inch
Weight: 55g
Hard disk cooling installation tutorial:
1. Turn off for STEAM DECK. Turn off the power to for STEAM DECK and unplug all cables before replacing the hard drive.
2. Remove the eight screws behind the STEAM DECK. Use a Phillips screwdriver to remove the 8 screws that secure the rear cover. Four 9.5MM screws and four 5.8MM screws; Keep the screws well during replacement to prevent loss
3. Pry open the rear cover. Insert a wedge along the edge of the right grip in the fine seam between the back cover and front shell; Pry up the rear cover with a lifting blade to release the clips
4. Remove the protective plate. Use a Phillips screwdriver to unscrew three screws that secure the protective plate, one 3.4mm screw and two 3.7mm screws; Remove the protective plate after removing the screws
5. Remove the solid-state drive. Use a Phillips screwdriver to unscrew the screws that secure the SSD; Remove the fixing screws and unplug the hard drive
6. Install the heat sink: Tear off the protective film of the heat sink; Tear off the protective film of the thermal conductive tape and apply it to the surface of the hard disk particles as shown in the picture; Align the heat sink with the hard drive and press it into the heat sink slot
7. Install the solid-state drive. Insert the solid-state drive with the heat sink installed back into the slot and tighten the screws
8. Replace the protective cover plate. After installing the hard drive, align the protective cover with the screw holes on the body and replace it
9. Install the protective cover. Replace the three fixing screws and secure the protective cover
10. Replace the eight screws on the back of STEAM DECK. Clip the back cover buckle into the body; Install the body screws to secure the back cover, and the installation is complete

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

 
 
Packages: 
1 x Heat Sink Set